error/status code 0104 wd Aylett Virginia

Address 9123 Dickey Dr, Mechanicsville, VA 23116
Phone (804) 746-8883
Website Link
Hours

error/status code 0104 wd Aylett, Virginia

Retest. Re-Test Drive 356 DAM 1 Data Address Mark. thefultonhow, Jun 19, 2006 #5 troxartas Joined: Jun 19, 2006 Messages: 5 okay....i'm running memtest right now (just started second pass, first pass found nothing), and i just made a diagnostic There may be repairable media errors on a platter.

Create and use a new DLG Tools diskette. As for Linux running from the CD it is just mostly running from the CD/RAM but if it will see the drive and somewhat access it, then try backing up any I had similar problems on an EVGA mobo. This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly.

Check cable & retest. Retest after checking the connections. After that I booted the PC from a Windows XP disc and initiated the recovery console. Re-Test Drive 103 Write Fault Error A Write command during the test has failed to complete.

Thanks in advance. Ten or more instances of information on data positioning and location could not be found. EDIT: These are the captures of the two error messages that I got when I mount the bad HDD connected via SATA on Ubuntu: What should I do now? Drive should be replaced.

ReplaceDrive 580 Missing Interrupt An interrupt request failed during the test process. The drive should now be defect free. Computers with S.M.A.R.T. Retest after checking the connections.

i ever experience this issue on WD RE3 drive all of sudden the drive crashed when playing mp3, the sound become noised at first i thought its just software related issue... That way you may be able to recover your data if the problem is located in the mobo. QUESTION 1 : Existe t'il une possibilitÊe que ce disque soit mort ? Replace Drive 357 DAM 2-9 Data Address Mark.

Replace your cable and retest the drive. Yes, it's a lot of data (over 1.5 TB), but thankfully there's nothing really important in there. An interrupt command to perform a specific task failed to complete. The same utility and the original code used to lock the drive are necessary to unlock this drive.

Please ensure that you are using the proper version of diagnostic utility. Share this post Link to post Share on other sites FastMHz 9 Member Member 9 408 posts Location:Hagerstown, MD, USA Interests:Technology, Electricity, Solar Posted March 27, 2011 · Report post Sorry mate Share this post Link to post Share on other sites Elohssa 0 Member Member 0 12 posts Posted March 20, 2011 (edited) · Report post Thanks for your Re-Test Drive 108 Seek Not Complete A Seek command did not complete in the time allotted.

This may be an anomaly or a defect with the drive. It's been on the 6% for the last 11 hours or so. At this moment that is the only unit in the other PC and is connected via a SATA cable to the motherboard in that PC. If not then you need to establish some HD performance tests to see if the drive can pass every benchmark.

Re-Test Drive 203 DRM Attribute too low beforemedia scan. It also may be due to a defective connection. Replace the drive if the error repeats. enabled help you monitor a drive's internal status through diagnostic commands.

One last question: does it make any sense to try to open the drive? You may need to rescan to ensure that the repairs were effective. It also may be due to a defective connection. After the problem happened, I took it out of the USB enclosure and I moved it into another PC.

I can't believe they sent me a replacement drive and then it failed within a week! The error/status code was 0104. To this day I wonder if I had shoved a wooden toothpick into the sata port to jam the cable in . . . Re-Test Drive 257 ECC 2-9 Error Correction Code.

Sorry to ask so many questions, but my knowledge, especially in Linux, is poor. I've tried it on different ports (should be one from each controller now). Retest after checking the connections. This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly.

Retest after checking the connections.