general misprint error hp 4250 West Valley New York

We are family owned and operated.  The Dusterhus family has been proudly serving the Arcade, Ny area since 1998.   

Address 662 Main St, Arcade, NY 14009
Phone (585) 492-0012
Website Link http://www.arcadecellular.com
Hours

general misprint error hp 4250 West Valley, New York

Remove the print cartridge from the printer. If the above action does not solve the issue, contact HP or an authorized service provider. 13.XX.YY JAM IN TOP COVER AREA Description Paper has jammed in the top-cover area of Replace the engine controller board.HP LASER PRINTER 4500, 4550 1. X Description 2- air-temperature sensor 3- DC controller 4- power supply Action Turn the printer off and then on.

The printer cannot process the page quickly enough. Press the SELECT button to print from a different tray.3. Action NOTE: Press the ? (Help) button for detailed information about clearing the jam. Trying to print envelope in duplex mode (envelopes cannot be duplexed).

alternates with 55.X PRINTER ERROR To continue press (Select) Description The DC controller is not communicating with the formatter. HP LASER PRINTER 4200, 4250, 4300, 4350 ERROR 41.X 1. HP's website for error codes doesn't give much information on that particular error code, it just says to power cycle the printer then call HP if the problem persists.Have you tried Computer and printer may be set to different baud rates. 2.

The part of the top door that pushes the Plunger down is broken. 13 PAPER JAM 2686 Only: 1. Lift the optional duplexer up and then pull it out to remove it. A critical firmware error has occurred that caused the processor on the formatter to abort the operation HP laserjet 4250 49.24.02 error A critical firmware error has occurred that caused the If you think you have received a fake HP Support message, please report it to us by clicking on the blue “Report Inappropriate Content” button above the message.

Paper tray empty or not seated correctly. 2. X=2: Laser malfunction. 52 ERROR (Incorrect Scanner Speed) 1. This document explains the message types, it lists and explains the numbered error messages, and provides recommended actions for resolving problems. alternates with 55.X PRINTER ERROR To continue press (Select) 56.1, 56.2 PRINTER ERROR To continue turn off then on 57.X PRINTER ERROR To continue turn off then on 57.7 DUPLEX FAN

CLEARABLE WARNINGS has two settings, JOB (the default) and ON. Check RAM expansion card, reseat if necessary. 2. If paper is present, remove it. The JOB setting determines that the clearable warning message appears until the end of the job that generated the message.

Click here for instructions on how to print a Configuration page. If the problem persists, contact HP Customer Support. Replace Registration Assembly. 5. If the printer is plugged into a wall outlet, try another power source in the building that is independent of the one currently being used.

The page containing the error will be printed.2. For S/NS between 2925J00000 and 3047J99999. Replace the laser scanner ass'y.2. Replace if either is bad. 4.

Remove the print cartridge and check the paper path for paper. Worn feed and separation rollers.HP COLOR LASER PRINTER 4600, 5500 ERROR 41.3 UNEXPECTED PAPER SIZE IN TRAY.1. The page containing the error will automatically be reprinted. 3. top 13.12.07 JAM IN STAPLER Description There is a jam in the stapler cartridge.

Pro Slate 12) OR Browse all HP products Please wait while we process your request. Ensure that all trays are configured correctly before printing again. Action NOTE: Press the ? (help) button for detailed information about clearing the jam. Press the SELECT button to continue or press ?

Please try again later. Inspect the Fiber Optics Cable for cuts or kinks. 2. If the printer is on a network, AUTO CONTINUE should probably be set to ON. A:  When your hp laserjet 4250 perform printer maintenance message appears on your display panel it is time to install a hp laserjet 4250 maintenance kit (q5421a).  The printer is programmed

top 41.3 UNEXPECTED SIZE IN TRAY XX For help press ? Replace DC Controller PCA. 2686 Only: 1. HP 4200 4250 4300 4350 Series Printer (Refurbished HP printers http://www.ValstarPrinters.com) Upon clearing jam and still receiving this error messages, this fix will clear it up in most instances. Категория Хобби Prints fine then slows and will fail.

IIISi/4Si Only: 1. i have to power off printer and power on, then it starts again at exact speed of printing. Loose toner should clear from the printer after a few pages are printed. See Service Note 33471A-02B if Serial No.

To view Help for a message (if available), press (Help). Disassemble clutch and re-grease. Do not tear the paper. Replace cable, Fuser to DC Controller, connector J206. (P/N RG1-0907-000.) 2.

Make sure that the paper is neatly stacked and that the paper guides are not too tight against the paper. Set High Speed to No and Advanced Functions to Off. Figure 40: Inserting fuser Install the rear output bin. Replace Main Motor PCA or Main Motor. 6.

Check the control panel setting for the paper size is correctly configured.HP LASER PRINTER 8100,8150 ERROR 41.31. Check paper feed roller. At least one of two tabs must be present. 3. Action NOTE: Press the ? (help) button for detailed information about clearing the jam.

IIP, IIP+, IIIP Only: 1. 57 Error Unit 1 - Incompatible memory card in top slot. 2. 57 Error Unit 2 - Incompatible memory card in bottom slot. 57.x ERROR (IIISi/4Si by dmzcompute on Oct 18, 2011 at 4:23pm Add comment Please sign in to comment 0 i am having the issue of turning it on and the lights will all light Inspect PostScript ROMs for bent or broken pins. 2. Disconnect all optional paper handling accessories and try printing again.

A temporary error occurred while printing.